Introduction
T-Bright Plus sintering furnace is an upgraded version of the ordinary Tianhao sintering furnace. It has the characteristics of precise temperature control, one-button start, and fast sintering;
At the same time, up to 150 teeth can be sintered and placed into 3 layers of crucibles; the furnace is imported from Japan and is pure and zero-pollution.
 |  |
Technical Parameters
Furnace size | 100*100mm (diameter*height) |
maximum temperature | 1700℃ (not more than 2 hours) |
Operating temperature | 1600℃ |
Control system | One-click start, fully automatic pollution-free guarantee, crown pre-baking design, circulating air intake, and imported heating rod, completely solve the pollution problem |
built-in programs | 7 preset programs (normal, long bridge, half mouth, quick burn, TT veneer, UT veneer, clean) |
Furnace material | Furnace imported from Japan, super long service life |
Fast sintering | 90 minutes (80 units per crown) |
Conventional sintering | 150 units, 3-layer sintering tray |
Thermocouple | Type B |
Temperature control accuracy | +/-1℃ |
rated power | 2 k W (one ordinary sintering only requires 8 kWh) |
net weight | 90kgs _ |
Dimensions | 480X635X840MM |
Features
1. Energy-saving, environmentally friendly, and pollution-free (furnace material is high-purity composite alumina/ceramic polycrystalline fiber, lightweight, less heat storage, energy-saving, and works at half power on average).
2. Easy to replace, energy-saving, and time-saving (the heating element is a silicon molybdenum rod, which has a long service life and is easy to replace).
3. Touch screen control, easy and flexible to use.
4. High-temperature control accuracy (the instrument is of high quality and the temperature control accuracy is ±1°C).
5. The furnace temperature has good uniformity and is heated all around (reasonable layout, balanced temperature field, and no dead ends in the furnace cavity).
6. Microcomputer program temperature control, adjustable heating rate, and automatic operation without manual supervision.
7. Automatic protection and alarm for over-temperature, over-pressure, over-current, leakage, broken couple, and broken rod.
8. The furnace bottom is electrically lifted and lowered, the lifting is smooth and vibration-free, and the lower port feeds materials.
9. Application scope: Mainly used for sintering of dentures and other ceramic bodies.
10. T-bright Plus adopts a fully automatic control mode, one-button start, one-button stop, and intelligent start, and stop.
11. The outer casing is spray-molded and has a beautiful and elegant appearance.
12. Good reputation and many customers.
13. Good cost performance and perfect after-sales service.
